PRODUCTS CENTER
This product model is prepared according to JB/T8459-1996 "Method for Preparation of Lightning Arrester Product Model". The non-gap product shall implement the standard of GB11032-2000 "AC Non-gap Metal Oxide Arrester". The gap product shall implement JB/T9672-2005 "Metal Oxide Arrester with Series Gap" standard. Important parameters and configuration methods not clearly defined in the above standards shall be revised according to the requirements of DL/T620-1997 Overvoltage Protection and Insulation Coordination for AC Electrical Installations.
Silicone rubber cable accessories are through the built-in geometry of the stress control unit to effectively solve the problem of electric field stress concentration at the stripping of the cable semiconductor layer, the stress control unit and the insulation layer composite as a whole.Using the good elasticity of silicone rubber, the interference fit between the accessories and the cable core insulation ensures the close combination between the cable core insulation and the accessories, thereby ensuring the interface characteristics.The external insulation of the silicone rubber cable accessories is designed to meet the Class IV pollution environment. The unique rain skirt interval design not only increases the creepage ratio of the product, but also improves its ability to prevent pollution flashover.Products comply with GB/T 12706-2008, GB/T 11017-2002, IEC 60502:2005, IEC 60840:2004 and other standards.
The prefabricated built-in shielding layer is adopted, the insulation layer is injected again, and the outer shielding layer is sprayed afterwards, which is composed of three layers. During installation, extrusion installation is adopted, and full sealing is realized through interference fit. The product has compact structure, small space, can be charged to touch, no insulation distance requirements, can achieve full insulation, full sealing, full shielding safety requirements. It is mainly used for the connection of 10kV transformers, switches and cable branch boxes, and is widely used in various fields of electric power, petrochemical, metallurgy, railway ports and construction.
The prefabricated built-in shielding layer is adopted, the insulation layer is injected again, and the outer shielding layer is sprayed afterwards, which is composed of three layers. During installation, extrusion installation is adopted, and full sealing is realized through interference fit. The product has compact structure, small space, can be charged to touch, no insulation distance requirements, can achieve full insulation, full sealing, full shielding safety requirements. It is mainly used for the connection of 10kV transformers, switches and cable branch boxes, and is widely used in various fields of electric power, petrochemical, metallurgy, railway ports and construction.