The high-voltage composite insulator adopts silicone rubber integral injection molding, which has good hydrophobicity and excellent insulation performance. Through synchronous crimping, the hardware has uniform plastic deformation and stable interface characteristics. The unique mandrel automatic positioning process ensures uniform sheath thickness.<br />It is suitable for transmission and distribution lines in salt spray areas, high altitude areas, heavily polluted areas, severe cold areas, and high temperature and humidity areas.<br />The product conforms to GB/T19519 standard.
Composite jacket oxide lightning arrester using electrical corrosion resistance, anti-aging, good elasticity, high mechanical strength of silicone rubber as the insulating jacket, nonlinear volt-ampere characteristics of excellent zinc oxide resistor as the core, the implementation of one-time injection molding, focusing on the advantages of organic composite insulation and zinc oxide resistor both.<br />It is mainly used for overvoltage protection of power station and transmission and distribution lines, distribution equipment, generator and motor, so as to protect the equipment from lightning overvoltage and overvoltage.<br />Products comply with GB11032 standards
The silicone rubber cable accessory effectively solves the problem of electric field stress concentration at the peeling of the cable semiconductor layer through the built-in geometric stress control unit, and the stress control unit is integrated with the insulating layer.<br />Using the good elasticity of silicone rubber, the interference fit between the accessories and the cable core insulation ensures the close combination between the cable core insulation and the accessories, thereby ensuring the interface characteristics.<br />The external insulation of the silicone rubber cable accessories is designed to meet the Class IV pollution environment.<br />The unique rain skirt interval design not only increases the creepage ratio of the product, but also improves its ability to prevent pollution flashover.<br />Products comply with GB/T 12706-2008, GB/T 11017-2002, IEC 60502:2005, IEC 60840:2004 and other standards<br />