PRODUCTS CENTER
The product is suitable for the boundary between 10kV overhead distribution line and users (including temporary users) of 10kV neutral point ungrounded (Type I), grounded by arc suppression coil (Type II) or grounded by low resistance (Type II) system. It is mainly used for breaking and closing the load current, overload current and short-circuit current in the power system, and at the same time as the single-phase grounding protection at the user boundary. This product is used in conjunction with the control device to meet the requirements of the distribution automation system.<br />The product introduces foreign advanced monostable permanent magnet control technology, each phase is equipped with a set of driving device, the three phases are linked by the synchronous shaft, the mechanical moving parts are simple and compact, and the reliability is greatly improved compared with the elastic operation structure. The electrical life of the switch can reach more than 30000 times.<br />Products in line with GB1984, IEC62271-100 and other standards.
FZW28-12 mouth-type user boundary load switch is used at the user boundary of overhead lines, with manual and automatic operation functions. This switch adopts vacuum arc extinguishing and SF6 gas insulation. It is mainly used for breaking and closing the load current and closing short-circuit current in the power system, and at the same time, it cooperates with the front circuit breaker to realize the isolation and protection function of single-phase ground fault.<br />The product consists of three parts: switch body, control device and connecting cable.<br />The product conforms to GB3804 "3.6kV- 40.5kV high voltage AC load switch" and GB11022 "common technical requirements of high voltage switchgear and control equipment standards".
ZW20 port -12/24 type user demarcation circuit breaker is rated voltage 12kV, three-phase AC 50Hz outdoor power distribution equipment. It is mainly used for breaking and closing the load current, overload current and short-circuit current in the power system, and at the same time as the single-phase grounding protection at the user boundary. This product is used in conjunction with the control device to meet the requirements of the distribution automation system.<br />The product consists of three parts: switch body, control device and connecting cable.<br />Products in line with GB1984, IEC62271- 100 and other standards.