PRODUCTS CENTER
U.S.A SF6 ring main unit
Category:
Product Description
All primary conductive parts inside the environmentally friendly gas insulated ring main unit switch are enclosed in a sealed welded stainless steel box, with N or dry air as the insulation medium inside the gas box. The main switch adopts vacuum arc extinguishing, the isolation switch adopts a three position structure, and adjacent cabinets are connected through insulated busbars.
1. Applicable to the standardized cabinet structure requirements of the power grid
2. The blind drawing of the product meets the testing requirements of State Grid for temperature rise, partial discharge, etc.:
3. Actual mechanical stability of circuit breakers and load switches>10000 times:
4. The annual leakage rate of SF6 gas is less than 0.01%, and the leakage rate of production units is controlled within ten thousand:
5. The monthly production capacity of the enterprise reaches over 3500 units;
6. Cabinet shell protection level IP43:
7. Switch internal arcing 20KA/1S;
8. Standardized cabinet type with a production and delivery capacity of 15 days;
9. Integrated product with functional integration;
10. Meet the requirements of dynamic and thermal stability, grounding and closing 50KA/5 times

1. Applicable to the standardized cabinet structure requirements of the power grid;
2. The blind sampling of the product meets the testing requirements of State Grid for temperature rise, partial discharge, etc;
3. Mechanical stability of circuit breakers and load switch mechanisms>10000 cycles;
4. Simple structure, can be designed as an upper or lower isolation scheme, flexible operation, reliable interlocking, and easy installation
5. Realize zero emissions of greenhouse gases and environmental protection.
6. Adopting rectangular contact springs, the force value is stable, and the product has a long mechanical and electrical life
7. The wide-angle lens is equipped with an LED light source, which can effectively observe the fracture condition of the isolation switch and facilitate maintenance by operation and maintenance personnel. The lens barrel is made of aluminum alloy material, which has high strength and avoids the risk of primary circuit seal failure caused by aging.
8. The main switch operation adopts a button design, which is convenient and simple to operate. The button structure material is made of zinc alloy material to avoid aging and failure.
9. Switch internal arcing 20KA/1s;
10. Meet the grounding short-circuit closing capacity of 63KA/2 times.