PRODUCTS CENTER
It is assembled by SMC plate components, which has the advantages of insulation, aging resistance, impact resistance, flame retardant and corrosion resistance.<br />Internal can be installed circuit breaker, copper busbar, fuse type isolating switch and other power distribution devices to form indoor wall-mounted power distribution box, safe and reliable, beautiful shape, can be used for industrial power distribution system branch, segmentation, control and protection.<br />Circuit breakers, fuses and other power distribution devices can be installed inside to form indoor wall-mounted or embedded lighting boxes, which are used for branch, section, control and protection of office buildings and residential power distribution systems.
The product integrates low-voltage power distribution, power distribution, power distribution protection, data acquisition, power metering, load monitoring, low-voltage lightning protection, harmonic analysis, event recording, street lamp control, and reactive power compensation. The performance is stable and reliable. It can be widely used in the intelligent upgrading and transformation of ordinary low-voltage comprehensive distribution boxes of urban and agricultural low-voltage power grids, as well as low-voltage power distribution, reactive power compensation, electricity metering, operation management, and load assessment of municipal, garden residential quarters, and distribution network automation projects.<br />Products in line with GB7251.1, IEC60439- 1 and other standards.
GCK low-voltage withdrawable switchgear consists of power distribution center (PC) cabinet and motor control center (MCC). The product is suitable for AC 50(60)HZ, rated working voltage is less than or equal to 660V, rated current 4000A and below the control and distribution system, as power distribution, motor control and lighting and other power distribution equipment.<br />The whole cabinet adopts assembled combination structure, module hole installation, parts versatility, good applicability, high degree of standardization. The upper part of the cabinet is a bus room, the front part is an electrical room, and the rear part is a cable inlet and outlet room. The top part can be equipped with a bus bridge according to power needs. Each room is separated by steel plate or insulating plate to ensure safety.<br />The door of the drawer compartment of MCC cabinet is mechanically interlocked with the operating handle of the circuit breaker or isolating switch, and the door can be opened only when the handle is in the breaking position. The receiving switch, connecting switch and drawer of MCC cabinet have three positions: on position, test position and off position.<br />Products in line with IEC60439-1, G87251.1, GB/T14048.1 and other standards.
GGD AC low-voltage power distribution cabinet is suitable for power users such as substations, power plants, factories and mines, with AC 50Hz and rated working voltage of 380V. It is used for power conversion, distribution and control of power, lighting and power generation and distribution equipment.<br />The cabinet body adopts the general cabinet form, the frame is partially welded and assembled with 8MF cold-formed steel, and has 20-mold mounting holes, which has good versatility.