Switch finished series

Product Content

40.5kV 1250A

SSOD double column series outdoor column isolation switch (hereinafter referred to as isolation switch) is a hook rod operation type isolation switch, the knife has a self-locking device. This series of isolating switches is suitable for the isolation of 12 ~ 40.5kV overhead lines, and the opening and closing operations are carried out under no load. The main function is to isolate the voltage during equipment or line maintenance to ensure safe operation. Use with circuit breakers or load switches and provide a safe visible break for the line.

隐藏域元素占位

24kV 1250A

隐藏域元素占位

0.5kV double-pole low-voltage fuse-type disconnector

SSOD-0.5 series double-column low-voltage fuse disconnector, suitable for outdoor 500V, 50Hz/60Hz distribution lines, as the overload protection of the low-voltage side of the transformer, under certain conditions can meet the no-load transformer, no-load line and rated current. Mainly by the base, post insulator, contact knife, contact, fuse sheet and other major components.SSOD-0.5 series double-column low-voltage fuse-type isolating switch, the product is small in size, light in weight, easy to install at high altitude. Contact knife and contact using spring and spring compression, good and reliable contact. The product is designed with an arc extinguishing device, which can better protect the switch contacts from arc burning. The use of high-performance fuse, special zinc alloy material can provide accurate fuse point, can ensure reliable fuse. The main conductive circuit components such as contacts and blades are treated with copper silver plating process, and the superior conductivity of the product can meet the requirements of low voltage and high current of 200A-1000A load current.

隐藏域元素占位

12kV drop fuse

SSOC□ Single-column series 12kV outdoor high-voltage AC drop fuse is an overload protection device, which is installed on the high-voltage side of distribution transformers or on the poles of distribution lines, and is used for short-circuit and overload protection of transformers and lines, as well as for dividing and closing load currents. The drop fuse adopts single-column insulation and consists of an insulating porcelain bottle (or silicone rubber), a conductive structure body and an arc extinguishing tube. The static contact is installed at both ends of the cast copper bracket, and the moving contact is installed at both ends of the fuse tube. The fuse tube consists of an arc extinguishing tube and an epoxy glass cloth tube in the inner layer. The product has the advantages of flexible application, excellent characteristics, easy installation, long maintenance-free operation and long service life.

隐藏域元素占位

GW9 outdoor isolating switch

SSOD outdoor isolating switch is mainly used in AC 12KV/24KV, 50HZ power system, the load live high-voltage line switching and isolation, the maintenance of high-voltage bus, circuit breaker and other electrical equipment for electrical isolation, widely used in electric power, railways, mines, oil fields, enterprises and other fields.Products comply with GB1985 "AC high-voltage isolating switch and grounding switch", GB/T11022 "high-voltage switchgear common technical requirements", IEC282.2, IEC787 "high-voltage isolating switch" and other standards.

隐藏域元素占位

10kV outdoor isolating switch

SSOD outdoor isolating switch is mainly used in AC 12KV/24KV, 50HZ power system, the load live high-voltage line switching and isolation, the maintenance of high-voltage bus, circuit breaker and other electrical equipment for electrical isolation, widely used in electric power, railways, mines, oil fields, enterprises and other fields.Products comply with GB1985 "AC high-voltage isolating switch and grounding switch", GB/T11022 "high-voltage switchgear common technical requirements", IEC282.2, IEC787 "high-voltage isolating switch" and other standards.

隐藏域元素占位

10kV drop fuse (double spray)

SSOC outdoor drop fuse is mainly used in AC 10KV power system, used for overload and short circuit protection of transmission lines and power transformers, capacitor banks and split rated current, and can also be used as outdoor load switches. The product provides safe and reliable overcurrent protection for the power distribution system with reasonable structure, excellent performance and reliable quality.The product conforms to GB15166.3 (AC high voltage fuse, jet fuse) standard.

隐藏域元素占位

10kV drop fuse (single spray)

SSOC outdoor drop fuse is mainly used in AC 10KV power system, used for overload and short circuit protection of transmission lines and power transformers, capacitor banks and split rated current, and can also be used as outdoor load switches. The product provides safe and reliable overcurrent protection for the power distribution system with reasonable structure, excellent performance and reliable quality.The product conforms to GB15166.3 (AC high voltage fuse, jet fuse) standard.

隐藏域元素占位

ZW20-Customer demarcation circuit breaker

ZW20-12/24 type vacuum circuit breaker for rated voltage 12KV, three-phase AC 50HZ outdoor power distribution equipment. It is mainly used for breaking and closing the load current, overload current and short-circuit current in the power system, and at the same time as the single-phase grounding protection of the vacuum circuit breaker. This product is used in conjunction with the control device to meet the requirements of the distribution automation system.The product consists of three parts: switch body, control device and connecting cable.Products in line with GB1984, IEC62271-100 and other standards.

隐藏域元素占位

News Content

undefined

undefined